|Motor horsepower||Full load amps 230VAC||Full load amps 460VAC|
How many amps does a 3 HP 3 phase motor draw?
AMP DRAW BASED ON HORSEPOWER
|HP||1 Phase Amps||3 Phase Amps|
|115 volt||575 volt|
How many amps does a 50 HP 3 phase motor draw?
AC Motor Full Load Amperes
|HP||200 Volts||220-240 Volts|
How many amps does a 7.5 kW 3 phase motor draw?
Three Phase Motors
|MOTOR RATING||HP||APPROX. F.L.C. AT LINE VOLTAGE|
How many amps is 3 horsepower?
Common Horsepower to Amps Conversions
|3 HP||20.7 A||90%|
|3.5 HP||24.2 A||90%|
|4 HP||27.6 A||90%|
|4.5 HP||31.1 A||90%|
What size breaker do I need for a 3 HP motor?
Full Load Current: Three Phase AC Motors
|Motor Horsepower||Size Breaker|
|1-1/2||230V 460V||15 15|
|2||230V 460V||15 15|
|3||230V 460V||15 15|
|5||230V 460V||15 15|
How many amps is 15kw 3 phase?
Generator Current Ratings (Three-Phase AC)
|Power||Current at 120V||Current at 480V|
|9 kW||54.127 A||13.532 A|
|10 kW||60.141 A||15.035 A|
|15 kW||90.211 A||22.553 A|
|20 kW||120.28 A||30.07 A|
Does a 200 amp 3 phase service equal a total of 600 amps?
Originally Answered: Does a 200 amp 3 phase service equal a total of 600 amps? No, because each one of the three phase wires is supplying amperage for only one third of the time. The power rotates very fast between those three wires, 60 times per second, so that enables the wires to be much smaller than normal.
How many volts is a 3 phase line?
For three-phase, you connect line 1 to line 2 and get 208 volts. At the same time, you [can] connect line 2 to line 3 and get 208 volts. And you [can] connect line 3 to line 1 and get 208 volts.
How much power does a 2 hp motor use?
So, 1 HP for 24 hour = 746×24= 17904 Watt-hour which is equal to 17904/1000= 17.904 units. How many kWh does a 10 hp motor use?
How many watts does a 1 hp electric motor use?
|1 hp||745.699872 W||746 Watts|
|2 hp||1491.399744 W||1491 Watts|
|3 hp||2237.099616 W||2237 Watts|
How many kW is a 5 hp motor?
Hp to kW Conversion Table
|1 hp||0.745699872 kW||1 kW|
|5 hp||3.72849936 kW||4 kW|
|10 hp||7.45699872 kW||7 kW|
|15 hp||11.18549808 kW||11 kW|
How do I convert kW to amps?
For any single-phase AC circuit, Current, I = 1000 x kW / (Vac x P.F.) Therefore, amps can be calculated from AC – kW by dividing kW by the product of the RMS value of applied AC voltage and power factor and multiplying it by 1000.