Mobil 1 Synthetic Transmission Fluid Dexron/Mercon 1 Quart.
What kind of transmission fluid does a f250 Super Duty take?
Oil Type: Dexron VI.
What transmission fluid does a 7.3 take?
7.3L Power Stroke Oil/Fluid Specs & Capacities
|Oil & Fluid Specs|
|Automatic transmission fluid||MERCON V full synthetic ATF (replaces defunct MERCON spec, 4R100 & E4OD transmissions)|
|Manual transmission fluid||ZF S5-42/S5-47 (5 spd)|
|ZF S6-650 (6 spd)|
How much transmission fluid does a 99 f250 take?
The entire trans, torque converter, cooler, and lines hold about 18 quarts.
What kind of fluid goes in a Ford transmission?
Dexron III/Mercon – This is one of the most common fluids on the market. Most GM and Ford units call for this type of ATF, as well as many imports. If your owners manual recommends any form of Dexron, or any Mercon – other than Mercon V – this is the fluid you want.
How many quarts of transmission fluid does a Ford F250 take?
When equipped with an automatic transmission, the Ford F-250 requires 17.6 quarts of transmission fluid or 11.7 quarts with a manual transmission.
Is Mercon V the same as Mercon LV?
Over the years, the original Mercon was supplanted by Mercon “V”, Mercon “SP”, Mercon LV, and Mercon ULV which is the latest fluid.
What transmission fluid does a E4OD take?
Ford E4OD Transmission Specs
|ATF Type/Spec:||Ford MERCON V automatic transmission fluid|
|Transmission Filter P/N:||2WD applications||Motorcraft FT-113|
|4WD applications||Motorcraft FT-114|
|Fluid Capacity:||~ 17 – 18 quarts|
How many gallons does a 7.3 hold?
It appears the 7.3l with the regular cab and super cab have the 34 gallon tank. The 7.3l crew cab super duty has a 48 gallon tank! Check out the 2020 Super Duty Specs sheet I attached.
What problems does the 7.3 Powerstroke have?
As your 7.3 engine ages, the IPR is known to fail for a multitude of reasons, including: the regulator getting stuck, seals failing, sensors going bad, the wires get damaged, etc. A failed IPR will result in the engine either getting too much or too little fuel which can lead to a multitude of problems.
What kind of transmission fluid does a 2001 f250 take?
The type of transmission fluid the 2001 Ford F-250 uses is Dexron and Mercon. The transmission is one of the most critical parts of the vehicle.
How much transmission fluid does a 2000 f250 take?
The transmission fluid capacity for the 2000 Ford F-250 iS6. 8 pints for the 5 & 6-speed manual and 6.4 quarts for initial fill or 17 quarts for total fill for the 4-speed automatic transmission. The type that should be used for the truck is Mercon V.
How many gallons of coolant does a 7.3 diesel take?
The cooling system capacity on 1994.5 – 1998 F-Series trucks (“OBS”) is 7.24 gallons or 29 quarts. The cooling system capacity on 1999 – 2003 F-Series Super Duty trucks is 8.2 gallons or 32.75 quarts. Note – verify the radiator drain valve is closed before proceeding.
What is Mercon LV compatible with?
Formulated to meet the demands of most modern transmissions on the road today, Advantage® Uni-Syn LV DEXRON® VI/MERCON® LV ATF is also backward compatible with older GM Dexron specifications making it the perfect premium product to streamline your transmission fluid offerings.
What can be used in place of transmission fluid?
Any light weight quality engine oil or hydraulic fluid will work 5 to 10 single weight or multi weigh 5W-30, 10w 30. Yes.
Does Ford recommend transmission flush?
It is recommended that you change the transmission fluid in your Ford F-150 every 30,000-60,000 miles.