How do you check the transmission fluid in a Jeep Wrangler TJ?

A single car has about 30,000 parts, counting every part down to the smallest screws. Some of these parts are made at Toyota, but we also have lots of suppliers that make many of these parts. The 30,000 or so parts use different raw materials and different manufacturing processes.

Where is the transmission dipstick on a Jeep?

Locate the dipstick for the transmission fluid in the engine compartment. It’s near the firewall, close to the back of the engine. On most Jeep vehicles, the transmission dipstick is labeled and has a yellow or red “T” handle.

Do manual Jeeps have transmission fluid?

Jeep Wrangler manual transmissions are durable. However, checking the transmission fluid in your Jeep Wrangler is an essential part of proper maintenance. If you let the transmission fluid in your vehicle get too low, it can cause major damage and could potentially result in a ruined transmission.

How do I add transmission fluid to my Jeep?

How to Put Transmission Fluid in a Jeep Cherokee

  1. Engage the parking brake on your vehicle. …
  2. Start the Jeep and let it idle for about 15 minutes. …
  3. Pop the hood and locate the dipstick near your car’s transmission. …
  4. Remove the dipstick and wipe off any transmission fluid. …
  5. Replace the dipstick.

What type of fluid goes in a Jeep transfer case?

Transfer Case Fluid



Recommended lubricant for the NV231 transfer case is Mopar Dexron II, or ATF Plus 3, type 7176. Approximate lubricant fill capacity is 1.2 liters (2.5 pints).

THIS IS IMPORTANT:  What can I put on my car to prevent hail damage?

How often should you change transmission fluid Jeep Wrangler?

Overtime, the fluid’s consistency will begin to change, becoming too dirty and lacking additives to provide enough lubrication on the transmission’s internals. To avoid this issue, Jeep recommends the fluid be changed every 30,000 miles.

Encyclopedia auto repair